TiC,titanium carbide
1)titanium carbideTiC
1.The synthesis process oftitanium carbide with the detonation wave is investigated.研究爆轰波条件下合成TiC等碳化物陶瓷粉末的过程。
2.Results show that the FeNiCr/NiAl-TiC composite coatings are composed oftitanium carbide(TiC),intermetallic compound NiAl and ferrite(α-FeNiCr).用铝热反应合成工艺在钢管内表面制备出了FeNiCr/NiAl-TiC复合涂层。
英文短句/例句
1.Influence of TiC on Microstructure and Performance of H13-TiC Composite Layer Prepared by Laser CladdingTiC对激光熔覆H13-TiC复合涂层组织和性能的影响
2.Wear Resistance Investigation of TiC/TiC-TiB_2 Particle Locally Reinforced Low Cr Steel Matrix CompositesTiC、TiC-TiB_2局部增强低Cr钢基复合材料耐磨性的研究
3.Wear Properties of the In-situ TiC、TiC-TiB_2 Particulate Locally Reinforced Manganese Steel CompositeTiC、TiC-TiB_2颗粒局部增强中锰钢基复合材料耐磨性的研究
4.Transition Zone (Phase) on the Interface of TiB_2、TiC in Aluminum Alloys;铝合金中TiB_2、TiC界面过渡区(相)的研究
5.The Deposition and Properties of TiC/a-C:H Films;TiC/a-C:H薄膜的制备及性能研究
6.Study of the Porous MoSi_2-TiC Ceramic Matrix Composites;多孔MoSi_2-TiC陶瓷基复合材料的研究
7.Low Temperature Synthesis of TiCTiNTiCN Nanaocrystallites Via Chemical Metathesis Route;化学交换法低温合成TiCTiNTiCN纳米晶体
8.The Thermal Shock and Fatigue Behaviors of Al_2O_3-TiC Composite Ceramic;Al_2O_3-TiC复合陶瓷的热震和热疲劳行为
9.The Synthesis Research of TiC and TiN nanomaterials;TiC和TiN纳米材料的合成研究
10.Investigation of TiC Ohmic Contacts to N-type 4H-SiC Semiconductor;TiC/n型4H-SiC半导体欧姆接触研究
11.Preparation of Fe-TiC Composite Nanopowder;Fe-TiC复合纳米粉体的制备研究
12.Study on the Preparation and Crack Healing of Al_2O_3/TiC Composite;Al_2O_3/TiC复合材料的制备及裂纹愈合研究
13.Study of TiC/(Ti-Al+ZrO_2) Composites;TiC/(Ti-Al+ZrO_2)复合材料的研究
14.The First Principle Research of Properities of TiN and TiC;TiN和TiC性质的第一性原理研究
15.Fabrication of TiC-TiB_2-Fe_xAl_y Locally Reinforced Carbon Steel Composite;TiC-TiB_2-Fe_xAl_y局部增强碳钢复合材料的制备
16.Synthesis and Properties of TiN,TiNC,TiC Coatings;TiN、TiNC和TiC薄膜的制备及其性能研究
17.Effects of TiC Addition on Compositions of Combustion Products in the Ti:Al: C = 2:2:1 System;TiC对Ti:Al:C=2:2:1系燃烧产物的影响
18.Oxidation Resistance of Fe_3Al/TiC Composite at High Temperature;Fe_3Al/TiC复合材料的高温抗氧化性能
相关短句/例句
TiC/ Ti3SiC2TiC/Ti3SiC2
1.TiC/ Ti3SiC2 mixed powders were synthesized by mechanical alloying taking Ti, Si and C element powders as the starting materials.以Ti、Si和C单质粉末为原料,采用机械合金化合成了TiC/Ti3SiC2混合粉体,并用放电等离子烧结球磨粉体制备了致密的TiC/Ti3SiC2陶瓷。
3)NiAl/TiCTiC/NiAl
4)TiC-Al_2O_3TiC-Al2O3
1.Diffusion bonding of ceramic matrix compositeTiC-Al_2O_3 and tool steel W18Cr4V was successfully carried out by addition of composite interlayer Ti/Cu/Ti at 1 130 ℃ for 1 h with a pressure of 15 MPa.通过添加Ti/Cu/Ti复合中间层,控制加热温度1 130℃,保温1 h,连接压力15 MPa,实现陶瓷基复合材料TiC-Al2O3与高速钢W18Cr4V的真空扩散连接,TiC-Al2O3/W18Cr4V接头抗剪强度达103 MPa。
5)Fe_3 Al/TiCFe_3Al/TiC
6)TiC layerTiC层
延伸阅读
tic corrugated pipe分子式:CAS号:性质:具有环形槽结构,断面呈波纹状的塑料管。按壁结构不同分双壁波纹管与单壁波纹管,无孔波纹管与有孔波纹管。有孔波纹管用作农田的暗沟排水管,无孔波纹管用作户外电线保护套管、配线槽以及输送某些液体和气体等,由于其壁薄可节约原材料并且强度较高。