*2024年*急冷钎料 rapidly-cooled brazing alloy英语短句 例句大全

急冷钎料,rapidly-cooled brazing alloy

1)rapidly-cooled brazing alloy急冷钎料

英文短句/例句

1.Microstructure and properties of Si_3N_4 ceramic joint brazed with rapidly-cooled Ag-Cu-Ti filler metalsAg-Cu-Ti急冷钎料钎焊Si_3N_4陶瓷接头界面结构及性能

2.Study on Soldering Procedure and Joint Properties of Down Quenching SnAgCu Solder Alloy急冷型SnAgCu系钎料合金钎焊工艺及接头性能研究

3.Effect of soldering parameters on the soldered joint microstructure performance of the down quenching SnAgCu solder alloy工艺参数对急冷型SnAgCu系钎料合金钎焊接头组织性能的影响

4.Study on Process of Vacuum Brazing of Stainless Steel Exhaust Gas Recirculation Cooler Used XHBNi-5 Brazing-AlloyXHBNi-5钎料真空钎焊不锈钢废气再循环冷却器工艺研究

5.Study on the new type soldering acid and filler metal for restoration of ancient bronze;古代青铜器修复钎焊用钎剂与钎料的改性研究

6.Aluminum Alloy Soldering Procedure Research Based on the Sn-Pb-Zn Solder;基于Sn-Pb-Zn钎料铝合金钎焊工艺研究

7.The Research on Properties and Bonding Mechanism of Armorphous Cu-P Filler Metals;非晶Cu-P钎料的性能及钎焊机理研究

8.Ti-25Cu-25Zr Filler Metal and Pure Titanium Brazed ProcessTi-25Cu-25Zr钎料与纯钛的钎焊工艺

9.A Study on the Active Brazing of AlN to W-Cu Alloy with Ag-Ti_4 Active Filler AlloyAg-Ti_4活性钎料钎焊AlN与W-Cu合金研究

10.Bonding process of pure copper with amorphous Cu-P interlayer非晶Cu-P钎料钎焊接头形成过程

11.Characteristics of Amorphous Brazing Ribbon of Cu-P Based Alloy非晶态铜磷钎料真空钎焊紫铜的性能

12.Study on Processing Technology and Brazing Performance of Ag55Cu21Zn17Sn5Ge2 SolderAg55Cu21Zn17Sn5Ge2钎料加工工艺及其钎焊性能的研究

13.spelter brazing alloy铜锌基硬钎焊料合金

14.Qian welding materials, marketing. Qian welding materials manufacturing machinery sales.钎焊材料制造、销售。钎焊材料制造机械销售。

15.Phase Constitution of Soldering Seam and Mechanical Properties of Zn Matrix Filler Metal Soldering Magnesium Alloy AZ31B JointZn基钎料钎焊镁合金AZ31B接头的钎缝物相及力学性能

16.Research on the New Lead-Free Solder Processing Properties of Brazing and Mechanical Properties;新型无铅钎料钎焊工艺性及机械性能的研究

17.The Study of Low-Melting-Point Filler Metal for Al-Si-Mg Series Alloys Vacuum Brazing;Al-Si-Mg系锻铝合金真空钎焊低熔点钎料的研究

18.Study on Cu-based Filler Metal Brazed Composite Coating with Particle Reinforced;铜基钎料钎焊颗粒增强复合涂层的研究

相关短句/例句

rapid solidifiable快冷钎料

1.The differences in the diffusion ability of Si in the common andrapid solidifiable Al-Si brazing metal were preliminarily investigated and discussed.实验结果表明,普通钎料和快冷钎料中Si元素在母材基体中的扩散过程基本相同。

3)quenching of clinker熟料急冷

4)brazing alloy钎料

1.Properties and welding interface characterization of new-type Au-Ag-Gebrazing alloy;新型Au-Ag-Ge钎料的性能及焊接界面特征

2.The results indicate that the base metal, 60wt%BNi2+40wt%BNi5brazing alloy and BNi2brazing alloy is with similar passivation current, but the initial passivation potential is increased in turn, which demonstrates that their corrosion resistance is decreased in the same sequence.通过电化学方法研究了钎料分别为60%BNi2+40%BNi5(质量分数)和BNi2的316L不锈钢钎焊接头在人造海水中的耐腐蚀性能。

5)filler metal钎料

1.The vacuum brazing process of 5CrMnMo steel and YG8 hard metal were studied by using CuMnNifiller metal.选用CuMnNi钎料,研究了5CrMnMo钢与YG8硬质合金的真空钎焊工艺。

2.Thefiller metals and fluxes suitabled for 2A50 aluminum alloy brazing were selected according to the feature of 2A50 aluminum alloy and the test of spreadability and clearance fillabitity.针对2A50铝合金的特点,根据铺展性、填缝性试验,对适合其钎焊的钎料与钎剂作了选择,进行了接头强度试验。

6)brazing filler metal钎料

1.Wettability of two kinds of Pd-Nibrazing filler metals on Si_3N_4 ceramic;两种Pd-Ni基高温钎料在Si_3N_4陶瓷上的润湿性

2.Wettability of Au-Ag-Sibrazing filler metal series with Ni;Au-Ag-Si系钎料合金与Ni的润湿性

3.The vacuum brazing of 40Cr steel to hard alloy YG8 with CuMnNibrazing filler metal is investigated.选用CuMnNi钎料,对40Cr钢与YG8硬质合金进行真空钎焊试验,研究钎焊温度和Ni中间层对钎焊接头性能的影响,并用三点弯曲试验确定最佳工艺参数;通过使用扫描电镜观察显微组织及能谱分析钎料中各元素在母材中的扩散情况,并结合钎料在40Cr钢和YG8硬质合金上铺展的润湿角的比较,探讨了该钎料与母材的结合性能。

延伸阅读

钎料分子式：CAS号：性质：为实现两种材料（或零件）的结合，在其间隙内或间隙旁所加的填充物。钎料的熔点必须比焊接的材料熔点低。适宜于连接精密、复杂、多铤缝和异类材料的焊接。钎料按熔点高低分为软钎料（熔点低于450℃的钎料），硬钎料（熔点高于450℃的钎料）。钎料按组成分软钎料有锡基、铅基、锌基等钎料。硬钎料有铝基、银基、铜基、镍基等钎料。